Novara Trionfo 48cm @ Pedal Revolution Refurbished Bicycle Update

While shopping a while back I purchased a bottle of what I assumed to be olive oil, based on the presence of those words on the label as well as a prominently displayed Italian flag. It was only when I got home that I discovered it had been blended with canola oil, reducing it from prime bread-dipping status to mere general-purpose frying duty.

made-in-italy-vector-552497.jpg (380×400)

While the Made in Italy label does seem to gain the immediate attention and respect of the average American consumer, I hadn’t even seen that.  Just the flag.  Enough to buy the item.

image_5

You won’t see an Italian flag on this Novara Trionfo, but maybe its Italian name is enough to lure you in.  And in that case you won’t feel duped as I did, because this is very nice, classic steel road bike–not some off-brand fry oil lurking in the back of your kitchen cabinet.

 

image_4

Tange #1 steel tubing–lightweight & favorably comparable to higher-end Italian tubing, such as Columbus SL

image_1

Handlebar wrapped with Celeste tape, matching lettering & paint accents

Also of note is the internal cable routing. As a mechanic, it’s sometimes hard to feed the brake or derailleur cable through these small holes.  The makers of this frame, a late-1980’s model, took the trouble to design this feature well.  The cable went through perfectly, and I didn’t even have to bother to slightly pre-bend the end of the cable to help it find the exit.

 

image_6

New Shimano Tiagra-level brakes ready to clamp down

The Trionfo was stripped the the bare frame and fully rebuilt with more modern parts.  A size-appropriate 165mm crankset has been installed, as well as some narrower 38cm Soma Highway One handlebars.  It’s also got a nice set of 700 x 25 Gatorskin tires that should hold up well in our glass-strewned city.

Come check it out today! A good fit for someone right around 5′ tall.

$750

 

Advertisements

Univega 53cm Town-Style @ Pedal Revolution Refurbished Bicycle Update

Several weeks ago we had a customer come by the bike shop to donate an old Univega that dated back to her college days.  She hoped that we would make use of it, and we assured her as much.  It’s the objective of this post to show the process we go through to refurbish good-quality older bicycles here at Pedal Rev.

image_8

The Univega as it looked when it arrived: old and definitely pretty tired.

To be a reliable and comfortable bicycle for the next rider, this Univega really needed everything.  This started with removing all components from the frame and determining which parts could be re-used.

image_2

Though it might have stopped the bike well enough in the 1980’s, this old Dia-Compe brake caliper isn’t really up for tackling San Francisco hills.  Note extensive rust on spokes as well

 

image_3

The new Tektro dual-pivot caliper.  New, much more powerful, and high-polish silver finish.

image_13

The bottom bracket cups, complete with grease dating back to the Reagan/Thatcher years…

image_11

The bottom bracket spindle, again gummed up with late Cold War-era grease…

image_12

Amazing what some steel wool and a little buffing can achieve: under all that old grease the bearing races were still in very nice shape, so I repacked the cups with new 1/4″ ball bearings and fresh grease…

image_14

The original Shimano 600 front derailleur, featuring the unique “Arabesque” font, after a good detailing…

image_10

The fork crown and lower headset cup…a bit on the rusty side of things

image_1

After being given a ‘lil Tri-Flow/steel wool love…

image_5

Original sticker, which I left on.  Always interesting to consider the bike’s history.  This shop no longer seems to be in business, but it was originally founded by Czechoslovakian pro road racer Otto Rozvoda in the 1960’s.

image_9

Our sticker, affixed to the downtube

 

image_15

Ready to get built up with all the new/refurbished components

image_4

The original stem/handlebar.  Not the most comfortable setup for riding around the city.

image_6

Retro-style brake levers, modern indexed Shimano bar-end shifters, and cork bar tape finished off with some burgundy Newbaum’s.

image_7

A new derailleur mated to a 9-speed wide-range cassette and original crankset.  Got some new MKS Sylvan Touring pedals on there too!

image

The final product, featuring a new Shimano/Mavic wheelset, Panaracer Pasela 700 x 32 tires, Velo Orange stem/Soma Oxford Bar.  Ready for all the urban jungle has to throw at it!

She’ll be a good fit for somebody in the 5’3-5’7″ range.  Come take a test ride!

$700

SOLD!!!!

Motobecane Super Touring 58cm, Custom Town-Style

From what I can gather, 1980 seems to have been a fairly tumultuous time.  Americans were being held hostage in Iran as their home country watched helplessly on (at least for the most part).  The Soviets were invading Afghanistan, beginning the decades of political instability and human misfortune in that country; in response, Jimmy Carter boycotted the 1980 Moscow Summer Olympics.  And the U.S. economy wasn’t doing too well; Reagan was about to perform his trickle-down on America and swell the ranks of the billionaire class. On a more positive and politically unrelated note, the Lakers won the NBA championship and Magic Johnson played a real nice Game 6.

IMG_0031

Not too sure what was going on over in France, but I do know that Motobecane was still making bicycles.  They’d file for bankruptcy in 1981, but this fine Super Touring was ushered off the production line just in time for your cycling enjoyment.  Relatively thorough online research leads me to conclude it is indeed a 1980 model.

IMG_0028

This bike came to us in a pretty unorthodox fashion.  A gentleman called the shop a while back and I (Todd) picked up the phone.  He explained that he had an old Motobecane he wanted to donate, but would be shipping it to from out-of-state. I tried to suggest that it might not be worth his trouble, but he wasn’t sure what to do with it and wanted the bike to go to good use.  So I thanked him and said sure, ship it on out.

IMG_0030

As it turned out this was one of the better-quality Motobecane frames of that era, built with heat-treated steel tubing and a derailleur hanger.  We replaced the damaged original fork with a chrome one, and it’s been built up nicely for stylish around-town use.  Nearly all the parts, including the brakes and wheelset, are new.  Favorites of mine include the comfortable Soma Oxford handlebar and excellent Suntour ratcheting bar-end shifter.

IMG_0029

The bike would be a great fit for somebody about 5’10” to 6′.  Come check it out today!!

$600

SOLD!!!!!

 

Specialized Sirrus Lugged Steel Road Bike 44cm @Pedal Revolution Refurbished Bike Update

A great condition Specialized Sirrus road bike. Rebuilt with new wheels, new drivetrain, Pasela tires, Soma stem and Highway One bar.

44cm Fits 5′ -5’3″

$700.

sirrus1

irrus2 sirrus3